Inspection and processing of “Wabs” hoses

Inspection and processing of “Wabs” hoses Project type: Automatisation Date 2019 1 - Requirement Based on the priorities, we start with the automation of Wabs hoses with the Pressure differential test. In this case, the hoses are checked for tightness and length. Work instruction points 5 to 10./ in STEP 2, points 11 and 12 are then made. Instructions for work. In STEP 1, all other work is still carried out by one employee. The robot arm inserts the test pieces into the device and removes them again after the test. Depending on the result of the test (i.O. / n.I.O.), the parts under inspection are then completely assembled or destroyed in the further step. The work steps of automation include: 5. Plugging into the pane assembly 6. Semi-finished product is inserted into the guide/shaped part 2 by means of a lever device in the holder. Care must be taken to ensure that the hose is correctly seated and that the lever completely surrounds it. 7. Press the start button (possibly via PLC signal) 8. For i. CIF If the part under inspection is removed from the bracket and placed for the length test, which then starts automatically. In the case of n.I.O., the part under inspection is destroyed in the destruction unit and then enters the reject container. This process shall be documented. 9. When the length test is passed, the ringing starts. At n.i.O. is also destroyed and documented. 10. Moistening the moulded part with spirit (for subsequent assembly of the nozzle) Two Cretec QBIC robot cells are used. In Step 2. Image processing for optical inspection (designed exactly on request) If necessary, devices for gripping and depositing the hoses by the customer must be adapted; Destroying unit must be covered according to specification, ect. (possibly) Also pneumatic idea with collecting container